Quick answer: For a lot of Indonesian retail the label printer is not an accessory to the scanner — it is the thing that makes the scanner work at all. Repacked rice, single sachets, loose goods weighed into bags: none of it can be scanned until you print a code for it.
Label printers speak TSPL or CPCL, not the ESC/POS your receipt printer uses. On a tablet the connection is Bluetooth or network. For a repacking bench the NBBP-9250D handles volume; the portable NBBP-P581 works over Bluetooth where the repacking actually happens.
Repacking is the job
Bulk buying and repacking is a large part of how small Indonesian retail works. Rice, sugar, cooking oil, flour, spices and detergent arrive in sacks or drums and are portioned into the sizes customers actually buy.
Every one of those portions is, from the POS's point of view, a product that does not exist until you give it an identity. Until then it cannot be scanned, its stock cannot be tracked, and its margin cannot be calculated with any confidence.
A label printer turns each portion into a real product record. That is a bigger change than it sounds — it is the difference between knowing you sold "some rice" and knowing you sold forty-two 1kg packs.
What a repack label needs
- A barcode your scanner can read reliably — Code 128 is the sensible default for internal codes.
- The product name and weight, so staff and customers can tell 1kg from 5kg without scanning.
- A pack or expiry date where the product needs one.
- Price, if you display it — though a price on the label means reprinting when prices change, which is a real ongoing cost. Many shops leave price to the shelf ticket instead.
That content fits comfortably on a 40×30mm or 50×30mm label. The barcode is what sets the minimum, not the text.
The sachet case
Sachets sold individually are the most awkward stock in the shop, and worth handling deliberately.
They arrive as a connected strip carrying one barcode for the whole strip, or with a code too small and too curved to scan reliably from a single sachet. But you sell them one at a time. So the barcode that exists does not correspond to the unit of sale — scanning the strip code rings up the wrong quantity, and over a month that quietly ruins your stock figures.
The workable answer is to treat the individual sachet as its own product with its own printed code. Print a sheet of labels once, apply them as you break strips down, and the item behaves like any other scannable product. It is a small amount of labour that removes a permanent source of error.
Printing barcodes that actually scan
The point of the whole exercise is a closed loop: print, scan, find the product. Three things decide whether it holds.
- Do not shrink the barcode to fit. Barcodes need a quiet zone — blank margin on both sides — and a minimum bar width. A squeezed barcode looks fine and scans intermittently, which is the hardest kind of fault to diagnose because it works when you test it and fails at the counter. If it will not fit, use a bigger label.
- Get the print density right. Too light and the bars lack contrast; too dark and they bleed together. Both produce a code the eye accepts and a scanner rejects.
- Match what is in Moka. The number on the label must be exactly the number in the product record.
Test the loop before any bulk run. Print one label, scan it with the scanner you actually use, confirm the product comes up. Ten seconds now against a thousand unscannable labels later.
Direct thermal or thermal transfer: the climate decides
Direct thermal prints onto heat-sensitive paper with no ribbon — cheaper per label, fewer consumables. Thermal transfer uses a ribbon and produces a durable, dark image.
In Indonesia this decision carries more weight than it does in temperate markets. Direct thermal labels fade with heat, humidity and sunlight, and all three are in generous supply. A label in an air-conditioned minimarket will last months; the same label on stock in an un-airconditioned storeroom, or on a shelf catching afternoon sun through a shopfront, greys out far faster.
A working rule:
| Use | Recommendation |
|---|---|
| Fast-moving repacks sold within days | Direct thermal |
| Indoor, air-conditioned shelf labels | Direct thermal |
| Stock held in an un-airconditioned store room | Thermal transfer |
| Anything exposed to daylight | Thermal transfer |
| Labels on oily or damp packaging | Thermal transfer |
Tell us the environment when you enquire. It is a genuine specification question rather than an upsell, and most suppliers will not raise it with you.
Adhesive: check it will stick to what you use
Repacking means plastic bags, PET containers, sometimes damp or cold surfaces. Adhesive choice matters more here than the printer does.
- Check the minimum application temperature. Many general-purpose adhesives will not bond properly to a cold or damp surface — the label goes on and lifts an hour later.
- Plastic film is harder to stick to than card. Thin polythene bags in particular flex and stretch, which peels a rigid label off at the corners.
- Removable adhesive for re-used containers, so you are not scraping residue off tubs.
Send us a sample of what you are labelling if you are unsure. Adhesive is cheap to get right at the order stage and irritating to work around every day.
Connecting from a tablet
There is no driver to install on a tablet. The route is Bluetooth or network:
| Route | Use for |
|---|---|
| Bluetooth, portable printer | Labelling at the repacking bench or in the store room, where there is no fixed terminal |
| LAN or Wi-Fi, desktop printer | A fixed labelling station reachable from more than one device |
| USB to a back-office PC | Bulk label runs — label design software is generally more capable on a desktop |
Many shops end up with a combination: a desktop unit for bulk runs and a portable one for labelling as they repack. Those are genuinely different jobs and one printer does not do both well.
NETBYE label printers for Moka
| Model | Print width | Resolution | Speed | Interfaces | Best for |
|---|---|---|---|---|---|
| NBBP-9250D | Up to 100mm | 203dpi | 160mm/s | USB / LAN / Bluetooth / Wi-Fi | Repacking bench, bulk runs |
| NBBP-3015L | 16–82mm | 203dpi | 3–5 in/s | USB + Serial | Serial connection required |
| NBBP-220D | 48mm | 203dpi | 50mm/s | USB / Bluetooth | Compact counter use |
| NBBP-P581 | 48mm | 203 / 300dpi | 50–90mm/s | USB-C / Bluetooth | Portable, store room |
| NBBP-P582 | 48mm | 203 / 300dpi | 20–70mm/s | USB-C / Bluetooth | Portable, lightweight |
All accept TSPL/CPCL and ESC/POS, and print Code 128, Code 39, EAN and UPC among standard 1D symbologies, plus QR Code and PDF417. The Bluetooth models support iOS and Android as well as Windows and macOS.
See the full range of label printers, or narrow to desktop and portable models.
Calibration, and the test to run first
Label stock has gaps or black marks between labels and the printer uses a sensor to find them. Change label size and you must re-calibrate, or the printer feeds a fixed distance that does not match — and every label creeps further out of position. Calibration is a button-hold on the printer, not a software setting.
Then print the printer's own self-test before involving any software. If that comes out correctly, the printer, head, media and calibration are all fine, and anything still wrong is on the software side. Ten seconds, and it eliminates half the possible causes.
Frequently asked questions
Do I need a label printer or a scanner first?
If most of your stock is repacked or loose, the label printer — a scanner cannot read codes that do not exist yet. If most of your stock arrives barcoded, the scanner.
Can I print labels on my receipt printer?
No. A receipt printer uses a continuous roll with no adhesive and no gap sensing, so it cannot align to a label.
Labels are falling off plastic bags.
Adhesive, not printer. Thin film flexes and peels rigid labels at the corners, and cold or damp surfaces prevent bonding. Send us a sample and we will match the stock.
My labels drift out of position.
Media calibration. Re-calibrate and check the media guides are snug against the roll.
Labels fade after a few weeks.
Direct thermal fading, accelerated by heat, humidity and sunlight. Switch to thermal transfer for anything that needs to last.
How do I label sachets sold individually?
Give the individual sachet its own product record and printed code. The manufacturer's strip barcode refers to the strip, not to the unit you sell.
A note on this guide. The hardware guidance — command languages, calibration, barcode sizing, adhesives, direct thermal versus thermal transfer in tropical conditions — is what we know from the products we supply and we stand behind it. Which labelling software works with Moka, and what it supports, is a question for Moka; we have described connection routes and hardware requirements rather than their app. If something here did not match your setup, tell us and we will correct this page. We would rather publish something accurate than something impressive.
Get pricing
NETBYE supplies distributors, system integrators and retailers across Indonesia, Southeast Asia and worldwide. Our printers are built by our partner factories in Shenzhen and sold under our own model range — we handle specification, quality control and support, so you deal with one supplier rather than several factories. Direct wholesale pricing, low MOQ on first orders, and OEM/ODM covering branding, packaging and firmware defaults — including units shipped pre-calibrated for your label size.
Tell us which models, what quantity, your label size, what surfaces you are labelling and where the labels will be stored, and you will get an accurate quote in one reply. Request a quote.
Related guides
These guides form a set. If you are specifying a complete till, the other hardware for Moka POS is covered here:
And if you are comparing across POS software, the same hardware for other systems:

